TA6V
|  |
|
|
We propose this metal :
Trading : round bars in all diameters
Forge : rings, blocks, bars, rolls etc … (rough or pre-machined pieces).
|
| Carlier designation | TA6V |
| UNS designation | R56400 |
| European numbering designation | 3.7165 |
| AFNOR designation | TA6V |
| British Standard designation | RT31 |
| Applicable standards | | AMS 4928 | | | ASTM B265 | Plates | | ASTM B348 | Bars | | ASTM B381 | Forged bars |
|
Chemical composition
| en % | Ti | Fe | N | H | O | C | Al | Va | Total Impuretés | Impuretés chaque | | min | - | - | - | - | - | - | 5,500 | 3,500 | - | - | | max | Solde | 0,400 | 0,050 | 0,015 | 0,200 | 0,080 | 6,750 | 4,500 | 0,400 | 0,100 |
Density : 4.43
Guarantee mechanical results in MPa
| Standard | Rm | Rp
0.2% | A % | Z | HB | Hrc | Comments | | ASTM B348 - 97 | 895 | 828 | 10 | 25 | - | - | For diameter > 76.2 mm and maxi 64.5 cm² | | ASTM B381 - 97 | 895 | 828 | 10 | 25 | - | - | Forged and annealed metal, for diameter <1935mm² |
Forging conditions
Titanium and its alloys have two allotropic varieties. Consequently forging temperatures are in accordance with results to be obtained. In any case, please contact us.
Properties / Main use conditions
CAUTION : TITANIUM AND ITS ALLOYS ARE PYROPHORIC, SO IT IS CONVENIENT NOT TO STORE FINE WASTES (POWDERS, FILINGS, COUNTERSINKS OR CHIPS OF TURNING), IN CASE OF FIRE, ABSOLUTELY AVOID WATER AND USE EXCLUSIVELY WELL DRY SAND.
Standard alloy for all sorts of kniding (forging, rolling, etc…) able to suffer heat treatments with limited results. The addition of aluminium and vanadium brings high mechanical characteristics. The temperature for use is below 450°C.
Main applications
Typical application in aeronautics and aerospatial, cells and engines for planes, disks, blades, flanges, tanks for satellites, compressors, connecting rods for cars.
Heat treatment
Please, contact us
|
